Network - Panasonic WV-V6430L Operating Instructions Manual

Refer to the following sheet for detailed information.
Parameter
Event Type
Enable
Relay out
Alarm Delay
Send email
Capacity Limit
7.6.4.2

Network

When device is Disconnection, the abnormal alarm is similar with case of SD card error.
Parameter
Event Type
Enable
Record
Record Delay
Relay out
Alarm Delay
It includes: No SD Card, SD Card Error and Capacity Warning
Check to alarm when SD card is abnormal.
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
System can delay the alarm output for specified time after alarm ended.
The value ranges from 10s to 300s.
After you enabled this function, the system can send out email to alarm the
specified user.
This function is invalid when network is offline.
User can set SD card capacity that is left free in Capacity Warning. When
SD card space left is smaller than this limit, alarm occurs.
Figure 7-57
It includes Disconnection.
Check to enable network abnormity alarm.
Check it and when network abnormal alarm occurs, system will auto record.
System can delay the record for specified time after alarm ended. The value
ranges from 10s to 300s.
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
System can delay the alarm output for specified time after alarm ended.
The value ranges from 10s to 300s.
Function
Function
69