Tampering - Panasonic WV-V6430L Operating Instructions Manual

Refer to the following sheet for detailed information.
Parameter
Name
Sensitivity
Threshold
Waveform
Remove All
Delete
7.6.1.2

Tampering

The [Tampering] interface is shown as in Figure 7-50 and Figure 7-51.
Figure 7-49
Default area name includes "Region1", "Region2", "Region3", "Region4" and
custom.
It is sensitivity of brightness as VMD is more possible to be trigger with high
sensitivity. You can set up to four areas. The range is 0 - 100.
The recommenced value is 30 - 70.
It is to check target object area related to detection area. The lower the area
threshold, the easier to trigger VMD. You can set up to four areas. The range
is 0 - 100. The recommenced value is 1 - 10.
Red means motion detect is triggered. Green means motion detect is not
triggered.
Clear all areas.
Delete selected area.
Figure 7-50
Function
64