Smtp (Email) - Panasonic WV-V6430L Operating Instructions Manual

SMTP (Email)

7.3.5.
The [SMTP] interface is shown as in Figure 7-27.
Refer to the following sheet for detailed information.
Parameter
SMTP Server
Port
Anonymity
Username
Password
Sender
Authentication (Encryption
mode)
Title (Subject)
Attachment
Mail Receiver
Interval
Figure 7-27
Input server address and then enable this function.
Default value is 25. You can modify it if necessary.
For the server supports the anonymity function. You can auto login
anonymously. You do not need to input the user name, password and
the sender information.
The user name of the sender email account.
The password of sender email account.
Sender email address.
You can select SSL, TLS or None.
Input email subject here.
System can send out the email of the snapshot picture once you check
the box here.
Input receiver email address here. Max three addresses.
The send interval ranges from 0 to 3600 seconds. 0 means there is no
interval.
Note that the system will not send out the email immediately when the
alarm occurs. When the alarm, VMD Audio Detection or the abnormity
event activates the email, system sends out the email according to the
interval you specified here. This function is very useful when there are
too many emails activated by the abnormity events, which may result in
heavy load for the email server.
Function
47