Idle Motion; Powerup - Panasonic WV-V6430L Operating Instructions Manual

Select PTZ speed, it is "Middle" by default.
The system will make the PTZ rotate with the speed you just set.
7.4.2.7

Idle Motion

Idle motion means the device implementing the behavior which is set in advance when it is not receiving
any valid command within the set time.
Note:
It needs to set preset, tour, scan and pattern in advance.
Step1
Check "Enable" to enable the function.
Step2
Select idle motion.
Step3
Set "Number" and set "Idle Time".
Step4
Click "Save" to complete config.
7.4.2.8

PowerUP

PowerUp means the motion which is auto operated by the device after it is powered up.
Note:
It needs to set preset, tour, scan, pattern and auto in advance.
Figure 7-41
57