Refer to the following sheet for detailed information.
Parameter
Mode
7.2.2.8
Default
It is to restore camera parameter to factory default setup.
Check each items that need to set factory defaults and click Default button.
Profile Management
7.2.3.
The [Profile Management] interface is shown as in Figure 7-21.
•
When the "Mode" is set as "Auto", the system will auto adjust the
image definition according to the actual scene.You can select "Low",
"Middle" and "Hight".
•
When the "Mode" is set as "Off", then the defog function is disabled.
Figure 7-20
Figure 7-21
Function
41