Panasonic WV-V6430L Operating Instructions Manual page 92

case, disable "User Account Control" from the control panel.
Panasonic "IP Setting Software" is inoperable in other subnets via the same router.
•
Due to security enhancements in "IP Setting Software", "Network Settings" of the camera to be
•
configured cannot be changed when around 20 minutes have passed after turning on the power of the
camera. However, settings can be changed after 20 minutes for cameras in the initial set mode.
1. To start the Panasonic "IP Setting Software", click the [Run] button next to [IP Setting Software] from
the CD launcher menu window, or double-click on the shortcut icon created after installing the software
on the PC.
The License Agreement will be displayed. Read the Agreement and choose "I accept the terms in
•
the license agreement", and click [OK].
The "IP Setting Software" screen is displayed. If a camera is found, information about it, such as
•
the MAC address and IP address, is displayed.
2. Click the [Access Camera] button after selecting the MAC address/IP address of the camera to be
configured.
Note
When using a DHCP server and Network settings is DHCP, the IP address assigned to the camera can
•
be displayed by clicking the [Search] button of the "IP Setting Software".
When duplicate IP addresses are used, the number of the camera with the duplicate address is
•
displayed in overlap.
The displayed camera information is not automatically updated. Click the [Search] button to update the
•
information.
• It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses in
accordance with the protocol in use.
The information displayed can be sorted by clicking the title of each displayed item.
•
When the [Network Settings] button is clicked, the "Network Settings" screen is displayed and network
•
settings can be changed. For further information, refer to "Changing Network Settings".
3. When "Please click here to download and install the plug-in" in the "Live" page is displayed, follow the
on-screen instructions to install the software.
The "Live" page of the camera is displayed.
•
If the viewer software (Plug-in software) cannot be installed or images are not displayed, click the
•
[Install] button next to [Viewer Software] from the CD launcher window to install the software.
Figure 8-4
88