Parameter
PTZ
Snapshot
Set working period.
Click "Setup", and it will display the interface of working period. See Figure 7-48.
Set alarm period, it can enable alarm event within the range of set period.
•
There are totally six periods to set every day, click the check box in front of the period, and then the
•
period can be valid.
Select week number (default is Sunday, if users select the whole week, it means setting can be applied
•
to the whole week; users can also select the check box in front of the day to make separate setting for
some days).
Click "Save" button after setup, return to motion detect page.
•
Set area.
Click "Setup" and you can set area in the interface shown in Figure 7-49.
Different colors represent different areas. Each area can set different detection zones. Detection zone can
be irregular and discontinuous.
Here you can set PTZ movement when alarm occurs. Such as go to preset x when
there is an alarm.
The event type includes: preset, tour and pattern.
You need to check the box here so that system can backup VMD
snapshot file.
Function
Figure 7-48
63