Table of Contents
Advertisement
Setting the Initial Account
1
Set the initial account.
In the initial state, the initial account setting screen is displayed when the web screen is displayed.
Set a user name and password.
[Note]
The usable symbols for user name is following (# % + = , - _ ^ / @ . ~)
Do not set character strings that can be easily guessed by third parties.
Change the password at regular intervals.
The password must use at least 3 of the following 4 character types and be 8 characters or longer.
Alphabet upper cases
Alphabet lower cases
Numerals
Symbols (# % + = , - _ ^ / @ . ~ )
When a password is set that does not adhere to the above policy, take responsibility for use of the
device with due consideration for the security risks in the installation environment, etc.
A warning is displayed if the set password goes against the recommended setting policy. When
changing the password, click the [Back] button and set the password again.
When continuing with the setting with full understanding of the security risks, click [Continue] to
complete the setting.
If you forget the account information that was set, use the switches for initialization of service
switches to reset the user information used for connecting to the network. (→ page 73)
83
Advertisement
Table of Contents
