2. Main Interface Introduction
2.1
Log in
Open IE and input network camera address in the address bar.
For example, if your camera IP is 192.168.0.10, then input http:// 192.168.0.10 in IE address bar. See
Figure 2-1.
The login interface is shown as below. See Figure 2-2.
Input your "User name" and "Password" to have been registered when you access the camera at first.
Note:
Refer to "Network Configuration" in Installation Guide manual.
•
For security reasons, change the password periodically.
•
Figure 2-1
Figure 2-2
Input your IP
address here
3