Zte R800 Handbook page 57

Step 1: Log onto the WEB configuration interface of R800 LTE Router as provided in "5.2.1 Log onto the WEB Configuration
Interface".
Step 2: Click "Forwarding Settings > NAT" to open the "NAT" tab, as shown in Figure 5-5-1.
Step 3: Click "Create" to create a new NAT rule to map the WAN port to a LAN IP, as shown in Figure 5-5-2. See Table 5-5-1
for the configuration.
Parameter Name Meaning
Name Name of Rule
Protocol What protocol packet is matched for address
Figure 5-5-1 NAT
Figure 5-5-2 NAT
Table 5-5-1 NAT Parameters
How to Configure
Named by the User
Choose in the drop-down list:
52
R800
HANDBOOK