Zte R800 Handbook page 76

Step 3: Configure its parameters, the table below can be the reference:
Parameter Name
Export module log
Log interface
Port
Step 4: Click "OK"to save the configuration.
5.7.9. N T
ETWORK OOL
Network Tool
Network test, includes Ping function and Traceroute function:
Step 1: Log onto the WEB configuration interface of R800 LTE Router as provided in "5.2.1 Log onto the WEB Configuration
Interface".
Step 2: Click "System Management >Network tool" to open the "Network tool" tab, as shown in Figure below:
Table 5-7-4 Module Log Parameter
Meaning
Enable/disable module log export
Log interface that should be enumerated by module
TCP port for log export
71
How to Configure
Enable
Disable
Manual input
Manual input
R800
HANDBOOK