All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their re- spective owners. This document is provided “as is”, and all express, implied, or statutory...
Safety Precautions Usage Cautions � Read all the safety cautions carefully before using the device. � Only use the accessories included in the package, such as power supply adapter. � Do not extend the power cord, otherwise the device will not work. �...
Package Content Please make sure the ZXHN F680 package contains the items, refer to Table 2-1. Table 2-1 Package Contents Item Name Quantity ZXHN F680 unit AC-DC power supply adapter RJ-45 Ethernet cable Note: A socket outlet that is installed near equipment and that shall be easily acces- sible.
Figure 3-1 Indicators of the ZXHN F680 Table 3-1 describes the indicators on the front panel of the ZXHN F680 . Table 3-1 Indicators on the Front Panel Indicator Status Description The device is powered off. Power Solid green The device is powered on.
Indicator Description Status The device is not powered on or the network link is not established. The network link has been established but no Solid green LAN1–LAN4 data is being transmitted or received. Flashing green Data is being transmitted or received. The device is not powered on or the wireless interface is disabled.
WLAN button for enabling or disabling the WLAN function. Standard USB 3.0 interface, connected to a USB storage device USB2 for file sharing, fast backup, and data restoration. Figure 4-2 shows the interfaces on the back panel of the ZXHN F680.
Figure 4-2 Interfaces on the Back Panel Table 4-2 describes the interfaces on the back panel of the ZXHN F680. Table 4-2 Descriptions of the Interfaces on the Back Panel Description Interface Power 12 V DC power connector. Standard USB 2.0 interface, connected to a USB storage device USB1 for file sharing, fast backup, and data restoration.
� Network management: Provides multi-mode network management. Technical Specification For the technical specifications of the ZXHN F680 , refer to Table 6-1. Table 6-1 Technical Specifications Item Specification 220 mm (W) × 35 mm (D) × 310 mm (H)(Antenna...
Figure 7-1 Entire Connection Note: The USB2 interface is on the side of the ZXHN F680. Verify that the cable connections are correct, and press the On/Off button. After the power indicator is lit and other indicators operate properly, services of the carrier can be used.
The LOS indicator is flashing red or solid red after the device is powered on. � The optical fiber is not correctly connected to the ONT PON interface. � The optical fiber is broken or damaged. � If the indicator is solid red or keeps flashing, please contact the service provider for maintenance.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.