Table of Contents
Advertisement
Step 4: If"Internet Protocol (TCP/IP) Attributes"is as Figure 4-2-9 shows, then no alteration is required; if not, select"Obtain
an IP Address Automatically" in "General".
In the window "The Connection Uses the Following Item (O)", click "Internet Protocol (TCP/IP)", and double click to open
the window "Internet Protocol (TCP/IP) Attributes". See Figure 4-2-9.
Step 5 Click "OK", done.
Configuration Check
Step 6: Click "Start>Running", insert "cmd" in "Running" and press "Enter". Open the window "Running". See
Figure 4-2-10.
Figure 4-2-9 Internet (TCP/IP) Attributes
14
R800
HANDBOOK
Advertisement
Table of Contents
