Zte R800 Handbook page 37

Step 3: If you want to work in the server working mode of the DTU, configure the parameters for the DTU in the working server
mode, as shown in Table 5-3-3.
Parameter Name Meaning
Enable To enable/disable DTU.
Primary Center IP DTU center server address.
Primary Center Port DTU center server port.
Baud Rate Serial port baud rate
Data Bits Serial port data transfer bits
Check Bits Serial port check bits
Device ID Registered ID connected to data
SIM Card Number Registered SIM card number connected to
DTU Advanced Configuration
Table 5-3-3 DTU Parameters
How to Configure
Press the button to select.
Enable

Disable

Manual input.
Manual input.
Select Baud Rate to choose in the drop-down list from 115200, 57600,
38400, 19200, 9600, 4800, 2400, 1200, 600, 300
Choose from data bits: 8, 7, 6, 5
Choose from check bits: None, Odd, Even
8-digit hexadecimal number
32
R800
HANDBOOK