Configuration Examples - Siemens CP 1243-7 LTE Operating Instructions Manual

Application and properties

1.7 Configuration examples

1.7 Configuration examples
Below, you will find configuration examples for stations with a CP 1243-7 LTE.
SMS messages and e-mails
Figure 1-1
SMS
The CP can send SMS messages to a mobile phone or a configured S7-1200 station and
receive from these nodes. The mechanisms for this are as follows:
● SMS messages generated and sent as the result of an event.
For a description of the configuration, refer to the sections Data point configuration
(Page 76) and Messages (Page 100).
● SMS messages that are sent or received due to calling the corresponding program blocks
of Open User Communication.
You will find information on the blocks in the section Program blocks for OUC (Page 105),
you will find the description of the programming in the STEP 7 information system.
● Using a mobile phone, a diagnostics SMS can be requested, see section Diagnostics
options (Page 119).
For all mobile phones that send SMS messages to the CP, the authorize phone number
must be specified in the STEP 7 configuration of the CP (parameter group "Security >
Authorized phone number").
E-mails
The CP can send e-mails to a PC with an Internet connection or a mobile phone. The
mechanisms for this are as follows:
● E-mails generated and sent as the result of an event.
For a description of the configuration, refer to the sections Data point configuration
(Page 76), Messages (Page 100) and E-mail configuration (Page 68).
22
Sending messages by SMS from an S7-1200 station
Operating Instructions, 04/2017, C79000-G8976-C381-03
CP 1243-7 LTE