Siemens CP 1243-7 LTE Operating Instructions Manual page 80

Configuration
4.12 Data point configuration
Figure 4-4
When it is exported the data point information of a module is written to a CSV file.
Export
When you call the export function, the export dialog opens. Here, you select the module or
modules of the project whose data point information needs to be exported. When necessary,
you can export the data points of all modules of the project at one time.
In the export dialog, you can select the storage location in the file directory. When you export
the data of a module you can also change the preset file name.
When you export from several modules, the files are formed with preset names made up of
the station name and module name.
The file itself contains the following information in addition to the data point information:
● Module name
● Module type
● CPU name
● CPU type
Editing the data point information
You can edit the data point information in an exported CSV file. This allows you to use this
file as a configuration template for many other stations.
If you have a project with many stations of the same type, you can copy the CSV file with the
data points of a fully configured module for other as yet unconfigured stations and adapt
individual parameters to the particular station. This saves you having to configure the data
points for every module in STEP 7. Instead, you simply import the copied and adapted CSV
file to the other modules of the same type. When you import this file into another module, the
changed parameter values of the CSV file are adopted in the data point configuration of this
module.
80
Shortcut menu of the module
Operating Instructions, 04/2017, C79000-G8976-C381-03
CP 1243-7 LTE