Messages - Siemens CP 1243-7 LTE Operating Instructions Manual

Simatic net
Table of Contents

Advertisement

Configuration

4.13 Messages

Partner number (inter-station communication)
Specify the partner CP for inter-station communication for the selected data point by
selecting the required partner from the drop-down list. The access ID of the relevant partner
is shown in brackets.
The partners you specified in the "Partner stations" > "Partner for inter-station
communication" can be selected.
Data point index
Index of the corresponding data point on the communications partner.
Note:
● The data pair of the sending and receiving CP must have an identical data point index. A
receiving data point of CP 2 corresponds to a sending data point of CP 1 with the same
data point index.
● For the opposite communications direction, a second pair of data points must be created:
A sending data point of CP 2 corresponds to the receiving data point of CP 1. Once
again, both have an identical data point index.
4.13
Messages
Configuration of the messages
If important events occur, the CP can send messages. The following are configurable:
● SMS
The recipient can be a mobile phone or an S7-1200.
● E-mails
The recipient can be a PC with an Internet connection or an S7-1200.
You configure the messages with the message editor of the CP. You can find this using the
project tree:
directory of the station > Local modules > CP
For information on the network editor, refer to the section Data point configuration (Page 76).
You will find the characters permitted for message texts in the section Permitted characters
in the configuration (Page 103).
Requirements and necessary information
To transfer messages, telecontrol communication (parameter group "Communication types")
no longer needs to be enabled. With the CP you can send messages without using
telecontrol communication.
You will find the general requirements for using mobile wireless services such as network,
contract or IP address in the section Requirements for operation (Page 20).
100
Operating Instructions, 04/2017, C79000-G8976-C381-03
CP 1243-7 LTE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S7-1200 telecontrolCp 1243-7 lte-euCp 1243-7 lte-us

Table of Contents