Requirements Iec60950-1; Product Variants; Accessories List; Table 1: Processor Support - Kontron mITX-SKL-S-H110 User Manual

3.3. Requirements IEC60950-1

Take care when designing chassis interface connectors in order to fulfil the IEC60950-1 standard.
Users of mITX-SKL-S/H110 must evaluate the end product to ensure compliance the requirements of the IEC60950-1
safety standard are met:
The motherboard must be installed in a suitable mechanical, electrical and fire enclosure.
The system in its enclosure must be evaluated for temperature and air flow considerations.
The motherboard must be powered by a CSA or UL approved power supply that limits the maximum input current to
10 A via external barrel-type 12 to 24 VDC connector, and to 16 A via internal square 12 VDC ATX connector.
For interfaces having a power pin such as external power or fan, ensure that the connectors and wires are suitably
rated. All connections from or to the product shall be with Safety Extra Low Voltage (SELV) circuits only.
Wires have suitable rating to withstand the maximum available power.
The enclosure of the peripheral device fulfills the fire protecting requirements of IEC60950-1.

3.4. Product Variants

Table 1: Processor Support

Product Number
810700-4500
810700-4500
810700-4500
810700-4500

3.5. Accessories List

Table 2: Accessories List for mITX-SKL-S/H110

Product Number
1061-6709
1061-6746
1061-6748
1061-6750
1061-6752
TBD
Name
Core™ i7-6700
Core™ i5-6500
Core™ i3-6100
Pentium G4400
Part Name
USB 2.0 cable
LED switch cable
SATA cable
15-Inverter
LVDS cable
CABLE BUNBLE - mITX BOARD H110 Chipset
Including following cables:
1061-6709
1061-6746
1061-6748
1061-6750
1061-6752
www.kontron.com
Speed Memory
3.4 GHz 8 MB
3.2 GHz 6 MB
3.7 GHz 3 MB
2.9 GHz 3 MB
mITX-SKL-S/H110 – Rev. 1.1
Length
(mm)
200
200
300
700
700
// 13