Table of Contents
Advertisement
Starting and Stopping the UPS
B
Symbol description
Symbol
A
A
B
1
Starting the UPS
Switch off the AC input circuit breaker on the UPS backplane. The screen for initializing the UPS is displayed.
Go to the main screen.
When the progress bar on the initializing screen reaches 100%, the UPS main screen is displayed. The UPS
enters the bypass mode with buzzes.
Start the UPS
On the main screen, press
The UPS works in normal mode, with the buzzes stopped.
Description
Choose A.
Choose A and then B.
Some screens are omitted between the two
screens at both ends of the sign.
to go to the main menu. Choose Control > Startup to start the UPS.
Remarks
A and B indicate the operators
on the UPS control panel.
None
49
Advertisement
Table of Contents
