Table of Contents
Advertisement
Use screws to fasten the front mounting
ears of the KVM to the mounting bars of
the cabinet.
4
Connect the KVM to the PDU.
5
Connect the KVM to servers.
To facilitate subsequent maintenance, connect the servers in the rack to the eight KVM ports
(numbered from P1 to P8) from the bottom up.
Insert rear mounting ears to the rear
mounting ear conduits, and use screws to
secure the rear mounting ears to the
mounting bars of the cabinet.
NOTE
Connect the reserved power cable connector on the
PDU to the KVM. No ground cable is required because
the KVM is configured with AC power modules.
17
Advertisement
Table of Contents
