Securing the Integrated Sensor Mounting Arm
2f
Secure the integrated sensor mounting arm using the M5 Phillips screwdriver.
Rotate tube 1 to adjust the sensor mounting arm.
Adjust the angles of the smoke sensor and the camera using the rotatable connector, and secure the rotatable tube 2.
Adjustable connector
NOTE
• Two people are required to install the integrated sensor mounting arm with the help of a step ladder.
• Use an M5 Phillips screwdriver to secure self-tapping screws for the integrated sensor mounting arm base.
• Rotate tube 1 to adjust the sensor mounting arm until it is in the highest position. Then adjust the camera based
on the object to be monitored.
Tube 2
40
Tube 1
Camera
Smoke sensor