Table of Contents
Advertisement
5
Connect power cables.
NOTE
Connect the two reserved power cable connectors on the PDU to the server based on labels. Make sure that
the installation position on the label is the same as the server.
No ground cable is required because the RH2285 is configured with AC power modules.
6
Connect the switch and the server.
Find the network cables from the switch based on the labels and connect the network cables to the
corresponding ports on the server.
RH2285H
Lable example：
21/22U-Server-1-M
37U-S5700-G05
37
#5
Advertisement
Table of Contents
