Huawei MicroDC3000H Quick Installation Manual page 38

Installing the KVM
2e
1 Determine the installation position.
2 Remove the filler panel.
Hold one side of the filler panel with one
hand, and hold the buckle on the other side
of the filler panel with the other hand, press
the buckle with the middle finger, and pull
out the filler panel with proper force.
3 Install the KVM.
Remove the shipping bracket from the KVM
front panel.
Put the KVM on the guide rails through the
front of the cabinet as planned and slide it
to the right position.
38