Dispensing Hot Water - Dualit ESPRESS-AUTO Instruction Manual & Guarantee

DISPENSING HOT WATER

CAUTION: WATER WILL BE HOT AND BE DISPENSED
AT HIGH PRESSURE. SUBMERGE THE WAND TO
REDUCE SPLASHING.
1 PREPARE
Remove the froth nozzle
from the steam wand.
Caution: Wand may be
hot. Ensure the water tank
is filled with water.
4
ADJUST FLOW
The flow of water can be
adjusted by turning the
control knob between the
'off' and the 'steam/water'
position.
2 INSERT WAND
Insert into a deep jug or
teapot and point the wand
to a side wall to reduce
splashing.
5
STOP DISPENSING
To stop the flow, turn the
flow control knob to the
'off' position. Be careful not
to overtighten. Unplug when
not in use.
16
3 START DISPENSING
Turn the flow control knob
to the steam/water position.
It will start with a continuous
flow then start to pulse. This
is normal.
6
TURN OFF
Turn machine off by pressing
ON/OFF button after you
have rinsed through and
finished using the machine.
This will save energy.