Priming - Before Each Use - Dualit ESPRESS-AUTO Instruction Manual & Guarantee

PRIMING - BEFORE EACH USE

The brewhead, filter holder and cup must be the correct operating temperature before the
first use. Thereafter subsequent cups must be pre-warmed before EACH coffee.
1
FILL WATER TANK
Fill the water tank with
water; do not go above the
'MAX' mark. You will see air
bubbles at the connection
when correctly located.
4
ATTACH HOLDER
LOCK
Align the holder with the
open lock symbol, insert
then rotate 60° past the
closed lock symbol. Ensure
the holder is fully locked
before dispensing.
2
TURN ON
Plug in the power cord.
Press button 'ON'. Ensure
the steam control valve is in
the 'O' position. The auto
dosing buttons will flash. The
thermobloc is now heating
the water.
5
PRE-HEAT FILTER
HOLDER
Dispense a cup full of water
through the machine by
pressing the Tea button.
Ensure NO coffee or tea is
in the filter holder.
08
3
WAIT 40 SECONDS
The auto dosing buttons
will turn solid once the
temperature is correct for
extraction. If you're in a hurry
you can use the Auto start
feature (see page 18).
6
WARM CUP
If you like your coffee or tea
extra hot, the serving cup
must be warmed through
before EACH coffee or tea.
Dispense a cup full of water,
then discard the water. Your
machine is now ready to go.