Coffee & Tea Extraction - Dualit ESPRESS-AUTO Instruction Manual & Guarantee

COFFEE & TEA EXTRACTION
When switching from coffee to tea, all auto dosing buttons may flash due to the
thermobloc heating water to your chosen temperature. When switching from tea to
coffee, the machine may purge to cool the thermobloc. This is normal operation.
1 ATTACH HOLDER
LOCK
Align the holder with the
open lock symbol, insert then
rotate 60° past the closed lock
symbol. Ensure the holder
is fully locked before
dispensing. Place 1 or 2
warmed cups directly under
the nozzles of the filter holder.
4
STOP
EXTRACTION
When the correct dose has
dispensed, the machine will
automatically stop. Allow to
cool for 10 seconds before
removing NX holder. All auto
dosing buttons will illuminate when
ready for the next extraction.
Unplug when not in use.
2 SELECT AUTO
DOSE
To extract, press the espresso
or double espresso auto
dosing button. To extract
tea, press the tea auto dosing
button. TIP: Never use
auto dose tea function
with coffee capsules.
5
MANUALLY STOP
EXTRACTION
Stop extraction mid cycle
by pressing illuminated dose
button, when pressed again
full dose cycle will resume.
12
3 EXTRACTION
The espresso will flow out of
the filter nozzles. This may
take a few seconds. Only the
selected button will remain
lit. If the machine stops mid
extraction, discard capsule,
ESE pod or ground coffee.
6
BETWEEN DRINKS
Dispense a cup full of water
through the machine between
making a coffee and tea to
prevent tainting.