Table of Contents
Advertisement
4
5
START STEAM
Turn the Steam Flow Control
To heat milk using steam,
slowly between the 'off' and
leave the Steam Wand
the 'steam / water' position to
positioned just under the
adjust the flow of steam. You
surface of the milk. Do
will hear the pump operating;
not move the jug. Risk of
this is quite normal. Risk of
scalding.
scalding.
WHEN SWITCHING FROM STEAM TO COFFEE OR TEA EXTRACTION:
WAIT 10 SECONDS BEFORE REMOVING THE HOLDER AFTER DOSING
FIRST DRINK IS COMPLETE.
7
8
STOP STEAMING
To stop steaming, turn the
IMPORTANT NOTICE:
Steam Flow Control to
After each use, flush the
the 'off' position. Press any
Steam Wand by
button to exit the steam
dispensing water
function. The Pump will
(see page 19) or steam
operate to reduce the
to remove any milk
temperature to optimum
residue from inside the
coffee temperature.
Steam Wand. Wipe the
Steam Wand.
6
STEAMING MILK
FROTHING MILK
To froth milk, introduce
air to the milk by slowly
lowering the jug ensuring
the Nozzle remains under
the surface of the milk. Risk
of scalding.
9
FLUSH AND
TURN OFF
WIPE
Turn machine off by pressing
the Power ON/OFF Switch
after you have rinsed through
and finished using the machine.
This will save energy. Unplug
when not in use.
18
DISPENSING HOT WATER
CAUTION: WATER WILL BE HOT AND BE DISPENSED AT
HIGH PRESSURE. SUBMERGE THE WAND TO REDUCE
SPLASHING.
1
PREPARE
2
Remove the Froth Nozzle
Insert into a deep jug or
from the Steam Wand.
teapot and point the Wand
Caution: Wand may be
to a side wall to reduce
hot. Ensure the Water Tank
splashback.
is filled with water.
4
5
ADJUST FLOW
The flow of water can be
To stop the flow, turn the
adjusted by turning the
Steam Flow Control to the
Steam Flow Control
'off' position. Be careful not
between the 'off' and the
to overtighten.
'steam/water' position. Risk
of scalding.
INSERT WAND
3
START DISPENSING
Turn the Steam Flow
Control to the steam/water
position. It will start with a
continuous flow then start to
pulse. This is normal. Risk of
scalding.
6
STOP DISPENSING
TURN OFF
Turn machine off by pressing
the Power ON/OFF Switch
after you have rinsed
through and finished using
the machine. This will save
energy. Unplug when not
in use.
19
Advertisement
Table of Contents
