Dualit ESPRESS-AUTO Instruction Manual & Guarantee page 31

POSSIBLE CAUSE(S)
WATER DRIPPING FROM THE BREWHEAD WHEN STEAMING:
1. Excess water in the brewhead is left
over from previous operation.
MY MACHINE IS MAKING A LOUD AND CONTINUOUS PUMPING NOISE:
1. Water tank is not correctly seated in
position.
2. Water tank is empty.
MY MACHINE HAS STOPPED DURING USE:
THE AUTO DOSING AND STEAM BUTTONS ARE FLASHING
1. Water tank is empty.
MY MACHINE IS NOT WORKING:
THE LIGHTS ARE OFF AND THE MACHINE CEASES TO OPERATE
1. Fuse may have failed.
2. The machine has entered standby
mode.
MY MACHINE IS NOT DISPENSING CORRECT AMOUNT OF COFFEE OR TEA:
1. Your cup holds a different quantity of
coffee to the preset amount.
2. The dosing memory has been used to
change the dose.
STEAM IS VENTING FROM THE DRIP TRAY:
1. Water is being purged through the
machine to reduce operating temperature
ready for the next coffee
MY COFFEE OR TEA IS NOT HOT ENOUGH:
1. Filter holder is not pre-heated.
2. Cup or mug is not pre-warmed.
3. You may prefer your coffee extra hot.
MY MACHINE CLICKS WHEN AUTO DOSING IS SELECTED:
1. The valve is opening to allow water to
flow through the thermobloc
SOLUTION(S)
1. This is not cause for concern. This will
automatically stop when the machine has
finished steaming.
1. Locate water tank (see page 8, fig 1).
2. Fill water tank (see page 8, fig 1).
1. To prevent an air lock firstly remove the
filter holder. Fill water tank (see page 8, fig 1).
Your machine is now ready to extract your next
coffee.
1. Check and replace the fuse.
2. Contact the Dualit customer helpline on
+44 (0)1293 652 500 (09:00 to 17:00 Monday
to Friday).
2. Exit standby mode by pressing the 'ON'
button (see page 17).
1. Adjust the dose using the dosing memory
feature (see page 18).
2. Use the dosing memory feature to adjust the
dose to your desired amount (see page 18).
1. This is not cause for concern. This will
automatically stop when the machine has
finished purging.
1. Prime machine. (see page 8).
2. Warm cup (see page 8). You can also place
your cups warm on the cup warming plate.
3. Use the temperature boost feature. (see page
19).
1. This is not cause for concern it is part of the
operation of the machine.
31