ADVANCED FEATURES
AUTO START
The auto start feature allows
you to pre-select your dose.
Once heated up it will
automatically dispense your
drink.
If you like your drink extra
hot prime before use (see
page 8)
1
SET UP HOLDER
Select your prefered coffee
or tea and attach filter or
NX
holder (see page
®
9-11).
DOSING
MEMORY
The auto dosing buttons can
be programmed to fit your
desired cup size.
2
SELECT AUTO
DOSING
Set the power switch to
'ON'. The lights will flash.
Press the desired auto
dosing button. The selected
button will continue to flash.
1
DISPENSE
Press & hold the relevant auto
dosing button until the pump
starts (approx 5 seconds).The
machine will start to dispense.
Press the same button again
when the desired amount of
beverage has been dispensed.
18
3
AUTO START
The light will go solid once the
thermobloc is at the correct
operating temperature and
automatically dispense coffee
or tea.
2
SAVE
Your preferance is now
saved. The machine
remembers this dispense
volume, so the next time
the button is pressed the
same amount of beverage
is dispensed.