Dispensing Hot Water - Dualit 3 in 1 Coffee Machine Instruction Manual & Guarantee

5
4
START STEAM STEAMING MILK
Turn the Control Knob to To heat milk using steam,
leave the Steam Wand
the steam position. You will
hear the Pump operating; positioned just under the
surface of the milk. Do
this is quite normal. Steam
will begin to flow. Risk of not move the jug. Risk of
scalding.
scalding.
WHEN SWITCHING FROM STEAM TO COFFEE
EXTRACTION: WAIT 10 SECONDS BEFORE
REMOVING THE HOLDER AFTER DOSING FIRST
DRINK IS COMPLETE.
7
STOP STEAMING 8
FLUSH AND WIPE
Once you have the desired IMPORTANT NOTICE:
amount of frothed milk, turn After each use, flush the
the Control Knob to the 'off' Steam Wand by dispensing
position then move the jug water or steam to remove
away from the Nozzle. any milk residue from
inside the Steam Wand.
Wipe the Steam Wand.
6
FROTHING MILK
To froth milk, introduce
air to the milk by slowly
lowering the jug ensuring
the Nozzle remains under
the surface of the milk.
Risk of scalding.
9
TURN OFF
Turn machine off by pressing
the Power ON/OFF Switch
after you have rinsed through
and finished using the machine.
This will save energy.
Unplug when not in use.
18

DISPENSING HOT WATER

CAUTION: WATER WILL BE HOT AND BE DISPENSED
AT HIGH PRESSURE. SUBMERGE THE WAND TO
REDUCE SPLASHING.
1 2
PREPARE SELECT WATER
Remove the Froth Nozzle Set the Steam/Water
from the Steam Wand. Selector to the water setting.
Caution: Wand may be
hot. Ensure the Water Tank
is filled with water.
4 5
INSERT WAND START DISPENSING
Insert into a deep jug or Turn the Control Knob to
teapot and point the wand the steam/water position
to a side wall to reduce to start the water flowing.
splashback. You will hear the Pump;
this is quite normal. Risk of
scalding.
3
WAIT 40 SECONDS
Wait for the Temperature
Indicator to go out.
6
STOP DISPENSING
To stop the flow, turn the
Control Knob to the 'off'
position. The machine will
purge to get ready for the
next coffee. Unplug when
not in use.
19