Dispensing Hot Water; Advanced Features - Dualit Espress-Auto 3in1 Coffee Machine Instruction Manual & Guarantee

DIsPENsING HOt WAtER

CAUtION: WAtER WILL BE HOt AND BE DIsPENsED At HIGH
PREssURE. sUBMERGE tHE WAND tO REDUCE sPLAsHING.
1 2
PREPARE INsERt WAND
Remove the froth nozzle
Insert into a deep jug or
from the steam wand. teapot and point the wand
Caution: Wand may be
to a side wall to reduce
hot. Ensure the water tank
splashing.
is filled with water.
4
5
stOP DIsPENsING
ADjUst FLOW
to stop the flow, turn the
the flow of water can be
flow control knob to the 'off'
adjusted by turning the
position. Unplug when not in
control knob between the
use.
'off' and the 'steam/water'
position.
3
stARt DIsPENsING
turn the flow control knob
to the steam/water position.
It will start with a continuous
flow then start to pulse. this
is normal.
14

ADvANCED FEAtUREs

AUtO
2
sELECt AUtO
DOsING
stARt
the auto start feature allows
you to pre select your dose.
Once heated up it will
automatically dispense your
coffee.
If you like your coffee extra
hot prime before use (see
page 8)
1
sEt UP HOLDER
set the power switch to
select your prefered
'ON'. the lights will flash.
coffee and attach filter
Press the desired auto
or NX holder (see
dosing button. the selected
page 9-11).
button will continue to flash.
1
DIsPENsE
DOsING
MEMORY
the auto dosing buttons can
be programmed to fit your
desired cup size.
Hold down the relevant auto
dosing button for ten
seconds.the machine will
start to dispense. Press the
same button again when the
desired amount of has been
dispensed.
3
AUtO stARt
the light will go solid once the
thermobloc is at the correct
operating temperature and
automatically dispense coffee.
2
sAvE
Your preferance is now
saved. the coffee machine
remembers this dispense
volume, so the next time the
button is pressed the same
amount of coffee is
dispensed.