Setting Adhesive Pressure; Maximum Adhesive Pressure - Nordson EP 30 Manual

Hot melt application head EP 30
10

Setting Adhesive Pressure

Maximum adhesive pressure

P/N 397191B
The exact pressure must be determined for each application.
Adhesive pressure in
application head
Low
High
The maximum adhesive pressure may not be exceeded:
70 bar
Nordson will assume no warranty or liability for damage resulting from
incorrect pressure settings.
EP 30
Pump speed in melter
Increase
Decrease
7 MPa
Adhesive pressure
Increase
Decrease
1015 psi
E 2005 Nordson Corporation