Control Panel Removal And Installation - Sony BVW-55 Maintenance Manual

3-1-7. Control Panel Removal and Installation

1. Open the display panel.
2. Remove the fader control knobs as shown in the figure.
Flatblade screwdriver
Cloth or similar one
3 Insert a screwdriver into the square hole on the control panel, and unhook. Open the control panel.
4. Remove the two screws fixing the control panel.
n
Be careful no to drop the removed screws in the mechanical deck assembly.
5. Remove the six claws on the control panel, then remove the control panel in the direction indicated
by the arrow.
Flatblade
screwdriver
Hole
Hook
6. Install the control panel in the reverse order of removal.
BVW-55 P2
Fader control knob
3-1. General Information on Parts Replacement and Alignment
Fader control knobs
Control panel
Claws
BVTT3 x 8
Claws
Display panel
Claws
3-9