How To Take Out The Cassette When The Tape Is Slacked - Sony BVW-55 Maintenance Manual

1-11. How to Take Out the Cassette When the Tape is Slacked

1-11. How to Take Out the Cassette When the Tape is Slacked
1. Open the display panel.
2. Insert a driver or similar item into the rectangular hole and unhook as shown in the figure. Open the
control panel.
3. Turn the manual eject knob (red) counterclockwise while pushing down.
4. Tape starting to slack, turn the capstan cap portion counterclockwise to take up the tape to the T reel.
5. Repeat procedures 3 and 4 until the cassette compartment is opened.
m
. Stop turning the manual eject knob just when the cassette compartment is opened.
. If the cassette compartment cannot be closed after taking the tape out by the above procedure, try to
turn the manual eject knob clockwise two or three turns while pushing down.
Driver
Hole
Hook
Cassette compartment
1-36
Control panel
Display panel
Turn while
pushing down
Manual eject
knob (red)
Capstan cap
portion
BVW-55