Fixtures And Adjustment Equipment List; Fixtures - Sony BVW-55 Maintenance Manual

1-15. Fixtures and Adjustment Equipment List

1-15-1. Fixtures

n
. The tools used only in the maintenance manual Part 2 are also described.
. Refer to the maintenance manual Part 2 Volume 1 (Section 1-4) for details of the alignment tapes.
Fig. Part No. Name
1 A-8321-000A Extension board (EX-706)
2 J-6035-070-A Extruction tool (for PLCC socket)
3 J-6080-840-A Inspection mirror
4 J-6252-520-A Torque screwdriver
(12 kgf.cm) (1.2 N.m) [JB-5252]
J-6325-400-A Torque screwdriver (3 kgf.cm)
5 J-6325-110-A Torque screwdriver bit (for M1.4)
6 J-6325-380-A Torque screwdriver bit (for M2)
7 J-6322-420-A Tape guide adjustment driver (45)
8 J-6323-530-A Stop washer fastening tool
9 J-6323-890-A Torque cassette (FWD BACK TEN.) [MW-389]
10 J-6324-150-A Reel table height adjustment tool [MW-415]
11 J-6326-120-A Hexagon bit (for torque driver)
12 J-6530-380-A Conversion cable, 6P - 9P
13 J-6530-880-A Cassette reference plate
14 3-184-527-01 Cleaning cloth (15 cmx15 cm)
15 3-649-266-01 Parallel pin (d = 1.6 mm)
3-703-358-04 Parallel pin (d = 2.0 mm)
16 7-432-114-11 Screw locking compound (200g)
17 7-651-000-10 Sony grease SGL-601 (50 g)
7-651-000-11 Sony grease SGL-801 (50 g)
18 7-661-018-18 Diamond oil NT-68 (50 ml)
19 7-700-751-01 Nut driver (s = 4.5 mm)
20 8-960-096-01 Alignment tape, CR2-1B
8-960-096-41 Alignment tape, CR5-1B (METAL)
8-960-096-51 Alignment tape, CR2-1B PS
8-960-097-44 Alignment tape, CR5-2A (OXIDE)
8-960-097-45 Alignment tape, CR8-1A (OXIDE)
8-960-096-91 Alignment tape, CR5-1B PS (METAL)
8-960-096-86 Alignment tape, CR8-1B PS (METAL)
8-960-098-44 Alignment tape, CR5-2A PS (OXIDE)
8-960-098-45 Alignment tape, CR8-1A PS (OXIDE)
21 9-919-573-01 Cleaning liquid
22 A-8319-485-A IC memoy card box, CDS-20 assembly
23 A-8322-417-A CN-1935 board
24 1-772-003-11 IC memoy card (2 MB), MB98A81183
1-772-004-11 IC memoy card (4 MB), MB98A81273
25 1-958-196-14 Extension harness (SR66-EQ3)
26 1-959-894-11 Extension harness (DR1)
27 1-959-895-11 Extension harness (DR2)
*: P1= Used in the maintenance manual Part 1./P2= Used in the maintenance manual Part 2.
BVW-55
1-15. Fixtures and Adjustment Equipment List
For use
Extension of plug-in boards
Extruction of PLCC IC
Tape curl check
Tightening screws of cabinet
for installing and removing
Tightening screws (for M1.4 and M2 bit)
Tightening screws on mech. deck (l = 75 mm)
Tightening screws on drum, capstan,
reel motor and boards (l = 162 mm)
Tape path adjustment
Installation of stop washer
FWD back tension REV back tension measurement
Reel height check
Tightening screws on mechanical deck for
installing and removing (d = 1.5 mm, l = 85 mm)
Rewrite internal software
Reel height adjustment
Cleaning
Fixing position of cam gear
Fixing position of threading gear/drawing arm
when installing
Inhibits loosening of screws
CTL/AT head height adjustment
Tracking alignment
Video alignment
Tracking alignment (for PAL)
Betacam video alignment
Betacam audio alignment
Video alignment (for PAL)
Audio alignment (for PAL)
Video alignment (for PAL)
Audio alignment (for PAL)
Cleaning
Software update
Connection of the IC memory card box
Software update
Software update
Extension of the RP-107 board
Extension of the RP-107 board
Extension of the RP-107 board
*
Description
P2
P2
P2
P1/P2
P1/P2
P1/P2
P1/P2
P2
P2
P2
P2
P2
P2
P2
P1/P2
P2
P2
P2
P2
P1/P2
P2
P2
P2
P2
P2
P2
P2
P2
P2
P2
P2
P1/ P2
P2
P2
P2
P2
P2
P2
P2
1-39