Disconnecting/Connecting Flexible Card Wire - Sony BVW-55 Maintenance Manual

1-4. Disconnecting/Connecting Flexible Card Wire

1-4. Disconnecting/Connecting Flexible Card Wire
Three flexible card wires are used to connect between the MB-838 and SV-206 boards.
m
. Be sure to turn off the power when disconnecting and connecting the flexible card wire. To turn off the
power, be sure to disconnect the cable connected at the DC IN connector or the battery, in addition to
turning off the power switch.
. The holded flexible card wire remarkably shortens the life span. Pay careful attention when handling it.
Removal
m
. Do not pull the flexible card wire before unlocking.
. There are a conductive portion (printed side) and insulation portion (white belt) in the flexible card
wire. Confirm the direction of the flexible card wire before connecting it.
1. Unlock by shifting portion A of the connector in the direction indicated by the arrow, then pull out
the flexible card wire.
Installation
m
. Confirm that no stain or dust adheres on the conductive surface of the flexible card wire.
. Confirm that the connector is unlocked.
1. Insert the flexible card wire firmly as far as it will go.
2. Push portion A of the connector in the direction indicated by the arrow and lock the connector. At
that time, take care that the flexible card wire is not inclined.
1-12
Flexible card wire
A
Connector
Flexible card wire
A
Connector
A
Insulation portion
A
BVW-55 P2