SLV-SE350/SE500/SE600/SE650/SE700/SE800/SX600/SX700/SX800
Note: Follow the disassembly procedure in the numerical order given.
2-1. UPPER CASE REMOVAL
1 Two screws
(Case3 TP2)
2-2. REAR PANEL REMOVAL
8 Rear panel
3 Three claws
2 Harness
SECTION 2
DISASSEMBLY
3 Upper case
2 Two screws
(Case3 TP2)
6 Claw (SE500R)
7 Claw
(EXCEPT SE350/SE500K/SE600/
SE700R/SE800K/SX600)
1 Power cord
(CN101)
4 Two claws
5 Two claws
2-1
2-3. POWER BLOCK (SRV938EK) REMOVAL
2 Connector
1 Connector
(CN202)
5 Claw
2-4. FRONT PANEL SECTION REMOVAL
2 Connector (CN501)
(SE500/SE800/SX800)
4 Two claws
5 Two claws
6 Front panel section
(CN201)
3 Three screws
(B3)
6 Power block
(SRV938EK)
4 Claw
1 Flat cable (FDS-7/8)
3 Two claws