Settings Menu - Minelab EQUINOX 600 Instruction Manual

Contents

Settings Menu

The Settings Menu contains adjustable settings relating to the detector. You can change
audio and other detecting settings via this menu.
Settings
These top-level settings are the standard detecting adjustments
that control the performance of your detector.
Noise Cancel
Ground Balance
Volume Adjust
Threshold Level
Target Tone
Accept/Reject
Recovery Speed
Advanced Settings
Advanced Settings give additional control to customise detector
audio and target signals. You have sound options to assist with
hearing even more information about detected targets from the
audio alone.
Advanced Settings are located in the Settings Menu, indicated by a
line beneath the top-level Setting icon.
Tone Volume
Threshold Pitch*
Tone Pitch
Tone Break
Iron Bias
Threshold Pitch is not available in the EQUINOX 600.
Settings Menu Navigation
The Settings Menu can be accessed from any screen by
pressing the Settings button.
Each press of the Settings button will scroll to the next setting in
the Settings Menu in a left-to-right direction. After the last Setting
the detector returns to the Detect Screen. Press the Settings
button again to begin scrolling from the left again.
Pressing either the Detect Mode button or the Pinpoint/Detect
button from the Settings Menu will return you to the Detect
Screen.
The Settings Menu remembers the last accessed setting and will
return you to that setting the next time the Settings button is
pressed.
Accessing Advanced Settings
1. Navigate to any top level Setting that has an Advanced Setting
(e.g. Volume Adjust).
2. Press and hold the Settings button for 2 seconds. A line will
appear beneath the icon indicating you can now adjust the
Advanced Setting (e.g. Tone Volume). The screen will also
change to show the advanced values you can now adjust.
2 Seconds
3. Press and hold the Settings button for 2 seconds to return to
the top level setting.
The Settings Menu remembers if an Advanced Setting was last
accessed and will return you to that setting next time the Settings
button is pressed.
Settings Menu | 38