Advertisement
Quick Links
DOWNLOAD APP
www.itunes.com | play.google.com
NOTE:
GO‑FIND App works with
GO‑FIND 40/60 only.
Pro App FREE with GO‑FIND 60 only.
BLUETOOTH SMART COMPATIBLE
GO‑FIND 40/60 are BLUETOOTH SMART
compatible with iOS 8 and Android 4.3
mobile operating systems, and above.
WARRANTY TERMS
This product has a 2 year limited warranty from the
time of purchase. Please refer to www.minelab.com
for further warranty information.
COMPLIANCE
Information to the User (FCC Part 15.105)
NOTE: Class B Devices
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
CONTACT
North & South America
Minelab Americas Inc
T: +1 630 401 8150
E: info@minelabamericas.com
Asia Pacific
Minelab Electronics Pty Ltd
T: +61 8 8238 0888
E: minelab@minelab.com.au
www.minelab.com
CODE OF ETHICS
1.
Respect the rights and property
of others.
2.
Observe all laws, whether
national, state or local.
3.
Never destroy historical or
archaeological treasures.
4.
Leave the land and vegetation
as it was.
5.
Always obtain permission before
searching sites.
6.
Always fill in your holes after
digging.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment
and receiver
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected
• Consult the dealer or an experienced radio/TV
technician for help
Warning: Any changes or modifications not
expressively approved by Minelab Electronics could
void the user's authority to operate this equipment.
Europe
Minelab International Ltd
T: +353 21 423 2352
E: minelab@minelab.ie
Middle East & Africa
Minelab MEA General Trading LLC
T: +971 4 254 9995
E: minelab@minelab.ae
Part No. 4901-0189-6
Instruction Sheet
Advertisement
Related Manuals for Minelab GO-FIND Series
Summary of Contents for Minelab GO-FIND Series
- Page 1 If this This product has a 2 year limited warranty from the equipment does cause harmful interference to radio time of purchase. Please refer to www.minelab.com or television reception, which can be determined for further warranty information.
- Page 2 SET UP STEP 1. Your GO-FIND detector requires no STEP 4. Slide out the armrest to desired length STEP 7. Release the camlock lever to adjust the (typically just under your elbow). assembly or tools. Simply remove the detector from upper shaft to desired length, for your height.
- Page 3 DETECTING BASICS TREASURE VIEW (GO‑FIND 40/60 only) Treasure View LEDs light up when a metal object has been detected. QUICK START GUIDE As you get closer to the target, more LEDs illuminate. RED indicates an iron metal object (possibly trash). STEP 1.