Maintenance & Safety - Minelab EQUINOX 600 Instruction Manual

Contents
Maintenance & Safety
The EQUINOX is a high-quality electronic instrument, finely engineered and packaged
in a durable housing. Taking proper care of your detector is vital to ensure its ongoing
reliability.
General Detector and Accessories Care
• Do not use solvents to clean. Use a damp cloth with a mild soap
detergent.
• Do not leave in excessive heat/cold for longer than necessary
(e.g. in a car or outside overnight).
• Do not expose accessories not listed as waterproof to liquid/
moisture or excessive humidity.
• Do not allow children to play with the detector or accessories,
small parts are a choking hazard.
• Do not open or mutilate the internal batteries.
• Dispose of batteries as per local regulations.
• Only charge the detector and accessories according to the
instructions in this manual.
• Avoid charging the detector and accessories in extreme
temperature conditions.
• Do not dispose of the detector or accessories in a fire as this may
result in an explosion.
• Do not bring the detector or accessories into contact with sharp
objects as this may cause scratches and damage.
EQUINOX Detector Care
• Wash your hands before handling the detector after applying
sunscreen or insect repellents.
• If water gets into the headphone socket, it must be dried
carefully a with a warm air dryer in order to prevent corrosion
and/or false headphone connection detection.
• O-ring lubricant or grease is not required on waterproof seals.
• Do not use a petroleum based O-ring grease as it is likely to
damage the waterproof seals.
• Do not leave the detector in excessive cold or heat longer than
necessary. Covering it when not in use will help protect it. Avoid
leaving it in a hot vehicle.
• Never allow the detector to come into contact with gasoline/
petrol or other petroleum-based liquids.
• Avoid getting sand and grit in the shafts and fastenings (e.g. coil
yoke assembly and twist locks).
• If the upper or lower shafts become noticeably scratched, wipe
them thoroughly with a damp cloth.
• Hose the detector with clean water after use on the beach
(wading or submersion).
Maintenance & Safety | 61
• Ensure the coil cable is in good condition and not subject to
undue stress.
• Take precautions when transporting or storing the detector.
Although the detector is constructed from the highest quality
materials and has undergone rigorous durability tests, the
display screen could be prone to scratching or serious damage if
not treated with due care.
• Do not expose the detector to extreme temperature conditions.
The storage temperature range is from -20°C to +50°C (-4°F to
+122°F).
ML 80 Headphones Care
• Check local laws regarding the use of smart phones and
headphones whilst driving. If you use the headphones whilst
driving, ensure your attention and focus remains on the road
and you drive in a responsible and safe manner.
• Observe all signs that require an electrical device or RF radio
product to be switched off in designated areas. These could
include hospitals, blasting areas, and potentially explosive
environments.
• Turn off your headphones prior to boarding an aircraft.
• Never mount or store your headphones over any air bag
deployment area as serious injury may result if the air bag
deploys.
• Turn the headphones off before placing in a pocket or bag. If
the Multi-Function button is accidentally activated, your smart
phone may place an unintended call if paired.
• Do not expose the headphones to liquid, moisture or humidity,
as the headphones are not waterproof.
• Do not expose the headphones to extreme temperature
conditions. The storage temperature range is from 0 to +60°C
(32°F to +140°F).