Tone Pitch (Advanced Setting) - Minelab EQUINOX 600 Instruction Manual

Contents

Tone Pitch (Advanced Setting)

This Advanced Setting allows you to adjust the pitch of target responses for specific
types of targets. This makes it easier to hear your preferred targets.
The pitch of each Tone Region can be adjusted. This may be useful
to help differentiate between common targets with similar Target
IDs.
The Tone Pitch setting has a range from 1 to 25.
Tone Pitch adjustment is local; only the current Detect Mode
Search Profile will be affected by changes to this Advanced
Setting.
Tone Pitch is not available in Gold Mode*.
EQUINOX 600 allows only the first Tone Pitch to be adjusted.
EQUINOX 800 allows all Tone Pitches to be adjusted.
Adjusting Tone Pitch: 1, 2, or 5 Tones
1. Use the Settings button to navigate to Target Tone in the
Settings Menu.
2. Press and hold the Settings button for 2 seconds. A line will
appear beneath the Target Tone icon indicating you have
selected the Tone Pitch setting.
3. Press Plus (+) to set the Target Tone to a higher pitch. Press
Minus (–) to set the Target Tone to a lower pitch.
4. To advance to adjusting the pitch of the next Tone Region (i.e.
t2), press the Accept/Reject button.
If the Target Tone setting is set to a value of 1, there will only be 1
Tone Region (t1).
5. A long press of the Settings button will return you to the Target
Tone setting.
Tone Pitch (Advanced Setting) | 47
Tone Pitch Default Settings
Depending on the set number of Target Tones, there are different
default Tone Pitch settings for each Tone Region. These can be
adjusted to different values at any time.
Number of Tones
1
2
5
50
When adjusting the Tone Pitch
Advanced Setting, press the
Accept/Reject button to advance
to the next Tone Region.
Default Setting
11
1, 20
1, 6, 12, 18, 25
1, 20