Tone Volume (Advanced Setting) - Minelab EQUINOX 600 Instruction Manual

Contents

Tone Volume (Advanced Setting)

This Advanced Setting allows you to set a different volume level for each Tone Region.
This is a great feature when detecting in iron infested locations.
The volume of each tone associated with a Tone Region can be
adjusted.
The Tone Volume setting has a range from 0 (off ) to 25, with a default
setting of 12 for ferrous tones, and 25 for non-ferrous tones.
Tone Volume adjustment is local; only the current Detect
Mode Search Profile will be affected by changes to this setting.
The number of Tone Regions will vary depending on the
set value of the Target Tone setting. This allows you to
choose from 1, 2, 5 and 50 tones. Read
Target Tones' on page 46 for more information.
Adjusting Tone Volume
1. Use the Settings button to navigate to the Volume Adjust setting in the Settings Menu.
2. Press and hold the Settings button for 2 seconds. A line will appear beneath the icon indicating
that the Tone Volume Advanced Setting has been selected.
3. The Frequency Display will indicate the Tone Region that is currently selected (e.g. t1) and the Tone
Region segments on the Discrimination Scale will be on. Press the Minus (–) or Plus (+) buttons to
adjust the volume of the selected Tone Region.
4. Press the Accept/Reject button again to advance to the next Tone Region (i.e. t2). 1, 2, or 5 Tone
Regions can be adjusted depending on the selected Target Tone setting.
Only the ferrous tone (t1) can be adjusted on the EQUINOX 600.
5. Repeat until all Tone Regions have been adjusted.
6. A long press of the Settings button will return you to the Volume Adjust setting.
In trash or iron infested locations, set the Tone Volume of the ferrous Tone Region to zero
and increase the volume of the Tone Regions where your preferred targets will appear.
You will not hear undesired ferrous targets and highly desired high conductive targets signals will
be emphasised, by giving the loudest target response.
Other non-ferrous targets that are not within the preferred target Tone Region will be still be
heard, but will be quieter.
'Selecting the Number of
Tone Volume (Advanced Setting) | 43
t2
t1
Tone Volume adjustment screen for Tone
Region 1 (t1), with a Target Tone setting of
2; The Discrimination Scale is divided into
2 regions.
t3
t2
t4
t1 t5
Tone Volume adjustment screen for Tone
Region 1 (t1), with a Target Tone setting of
5; The Discrimination Scale is divided into
5 regions.
When adjusting the Tone
Volume setting, press the
Accept/Reject button to
advance to the next Tone
Region. (5 tones shown)