Turning The Detector On; Lcd Menu Structure - Minelab GPX-4500 Instruction Manual

Turning the Detector On

26
The On / Off switch is located
on the rear control panel.
To turn the detector on or off:
Press and release the On / Off toggle switch.
Function Setting
Select
On/Off
Hold for FP
Avoid turning the detector on and off repeatedly.
If this happens the Coil Overcurrent screen will
appear. Turn the detector off and wait for a short
time before turning the detector on again.
It is best to only turn the detector on
when outdoors and away from sources
of electromagnetic disturbance such
as power lines, transmitters, electric
fences and phone towers. These
sources may cause the detector to
perform erratically, giving numerous
false signals.
Note: If the detector emits an overload
sound move the coil away from any
large metal objects. Overloading is
not harmful to the electronics of
the detector.

LCD Menu Structure

Many of the GPX-4500 Functions
functions are accessed
through the LCD Menu.
These are explained in
further detail throughout
the rest of this manual.
Until you become more
familiar with the GPX-
4500, the detector can
simply be operated with
the Factory Presets
(pg. 48) and the front
panel controls.
27
Settings