Volume Adjust - Minelab EQUINOX 600 Instruction Manual

Contents

Volume Adjust

The Volume Adjust setting controls the level of all detector sounds to make them louder
or more quiet.
Volume Adjust changes the loudness of all detector audio,
including detection signals, the threshold tone, and confirmation
tones.
The Volume Adjust setting has a range from 0 (off ) to 25 with a default
setting of 20 for all Detect Mode Search Profiles.
When the volume level is set to 0, all audio is muted (off ).
Volume Adjust changes are global; all Detect Mode Search
Profiles will be affected by changes to this setting.
Adjusting the Volume
1. Use the Settings button to navigate to the Volume Adjust
setting in the Settings Menu.
2. Use the Minus (–) or Plus (+) buttons to decrease or increase
the volume to a comfortable level, making sure that loud
signals (close or large targets) do not hurt your ears.
If you try to exceed maximum volume, there will be an invalid
button press tone.
Volume Adjust | 42