User Profile - Minelab EQUINOX 600 Instruction Manual

Contents

User Profile*

EQUINOX 800 features an additional User Profile side button that saves a copy of the
current detector settings for future quick access.
User Profile stores the set values of all current local settings so that
you can access them instantly later.
The default settings for the User Profile are a copy of Park Mode Search
Profile 1.
Save a User Profile
1. Select the Detect Mode you wish to use as a basis for your User
Profile. Adjust the settings you wish to save.
2. Make sure you are in the Detect Screen, not the Settings Menu.
3. Press and hold the User Profile button on the right side of the
control panel.
4. The User Profile icon on the LCD will begin to flash rapidly. It
will then remain on and a rising confirmation tone will sound,
indicating that the User Profile has been saved.
You can save over the User Profile at any time by repeating the
above procedure.
Activating the User Profile
Press the User Profile button at any time to re-activate the saved
User Profile.
The User Profile icon will appear on the LCD when the User
Profile is active.
Any changes made to local settings when the User Profile is active
will be saved automatically.
To exit from the User Profile, press either the User Profile button
or the Detect Mode button. Settings will return to the last-used
Detect Mode Search Profile and the User Profile icon will turn off.
User Profile* | 33