Depth Gauge - Minelab EQUINOX 600 Instruction Manual

Contents

Depth Gauge

The Depth Gauge indicates the approximate relative depth of a detected target.
The Depth Gauge is a guide only; fewer arrows indicate a shallower
target, more arrows indicate a deeper target. The accuracy can vary
depending on the target type and ground conditions.
The Depth Gauge has 5 levels in increments of approximately 50 mm
(2").
When there is no detection, the Depth Gauge icon and arrows are
off.
After a target is detected, the Depth Gauge will remain on the LCD
for up to 5 seconds, or until the next target is detected.
Here is an example of the Depth Gauge reading and the
approximate target depth for a US quarter detected in benign soil:
50mm 100mm 150mm
2" 4"
The depth gauge accuracy is reduced in highly
mineralised soil.
200mm >200mm
6" 8" >8"
Depth Gauge | 35