Sime MURELLE REVOLUTION 25 User, Installation And Servicing Instructions page 48

– Press the click encoder to confirm the highlighted submenu
and access the modifiable area
Date
Hour
Cancel
– The first modifiable "Data/value" is highlighted (e.g. 06)
– Turn the encoder to modify the "Data/value" (e.g. from
06 to 12)
– Press the click encoder to confirm the modification and
select the next "Data/value" which will be highlighted (e.g. 36)
Date
Hour
Cancel
– Turn the encoder to modify the "Data/value" (e.g. from
36 to 50)
Date
Hour
Cancel
– Press the click encoder to confirm the modification and
select the next "Data/value" which will be highlighted (e.g. 01)
– Continue in this way until all the necessary modifications have
been made
– After all modifications have been made, press the
button to go back to the initial submenu (Date and time).
: The user must work in a CIRCULAR manner, meaning
NOTE
ALWAYS MOVING FORWARDS, even if a mistake is made.
– Turn the encoder to select another "Menu" (e.g.
Display).
48
SETTING DATE AND HOUR
DAY MONTH YEAR
01 Jan 2014
HOUR MINUTE
06 : 36
Confirm
SETTING DATE AND HOUR
DAY MONTH YEAR
01 Jan 2014
HOUR MINUTE
12 : 36
Confirm
SETTING DATE AND HOUR
DAY MONTH YEAR
01 Jan 2014
HOUR MINUTE
12 : 50
Confirm
Confirm
The "Display menu" allows the user to adjust:
– display contrast
– duration of the display back-lighting
– encoder back-lighting
The operating procedure is as has been described so far.
Fig. 117
m
CAUTION
"Factory settings submenu"
It is recommended that the user access this submenu
ONLY to restore the "Factory settings" , thereby deleting
all settings made by the user.
Otherwise, press the
button.
To proceed:
– Press the
screen appears offering the following options:
Fig. 118
– Press the
selected previously (Factory settings)
– Press the
Fig. 119
and, after a few seconds, go back to the "main screen"
GENERAL SETTINGS
Language ENG
Date and time [...]
Visualization [...]
Factory settings [...]
Esc Back
Esc
encoder to access the modifiable area. A
click
CONFIRM REQUEST
Confirm operation?
Cancel Confirm
button to go back to the "Menu"
Cancel
button to restore the "Factory settings"
Confirm
Fig. 120
or
Indietro
Fig. 121