Model Select "Model; End Point Adjuster "Epa - RadioLink RC4GS Instruction Manual

Both English and Chinese version menu are available for which is convenient for Chinese and
English-speaking players to personalize function menus.
(1) (1) Access the function menu (By pressing " Exit " and
"Enter"buttons simultaneously and holding them down for
one second), the Language select function will be chosen.
(2) (2) Press "Enter" button to get into "LANGUAGE"
function interface.
(3) (3) Use"Dec(-)"or "Inc(+)"key to select "English" the
selected language will be with black shading effect.
(4) (4) Press "Enter" button, the desired language is
selected and return to the initial screen automatically.

4.3 Model Select "MODEL"

RC4GS can store model memories for ten models. Use
this function to call a new model.
(1) Access the function menu (By pressing "Exit" and"Enter
buttons simultaneously and holding them down for one
second), press"Enter"key once, the Model select function will
be chosen.
(2) Press " Enter " button, the current active model will be
blinking.
(3) To activate a different model by pressing "Dec(-)" or "Inc(+)" button until the desired model
blinks.
(4) Press "Enter" button, the selected model stops blinking; now the model has been selected.
(5) Return to the initial screen by pressing "Exit" button twice.

4.4 End Point Adjuster "EPA"

Use EPA when performing left and right steering angle adjustments, throttle high side/brake
side operation amount adjustment, and channel 3 servo up side/down side operation amount
adjustment during linkage.
Correct the maximum steering angle and left and right steering angles when there is a difference in
the turning radius due to the characteristics, etc. of the vehicle.
Setting item (channel and
direction) ST-LFT: Steering (left)
ST-RGT: Steering (right)
TH-FWD: Throttle (forward)
TH-BRK: Throttle (brake)
3C-LFT: 3rd channel (left)
3C-RGT: 3rd channel (right)
4C-UP: 4th channel (up)
10