Gold's Gym XR45 User Manual page 8

3. Attach the Front Leg (7) to the Base (1) and to
the Front Base (94) with two M8 x 20mm Screws
(96). Do not tighten the Screws yet.
Attach the Leg Bumper (60) to the Front Leg (7)
with an M4 x 20mm Self-tapping Screw (69) and
an M4 Washer (33). Make sure that the end of
the Leg Bumper is pointing upward.
4. Attach the Seat Frame (6) to the Lower Upright
(93) with two M8 x 65mm Bolts (68), two M8
Washers (59), and two M8 Locknuts (58). Do not
tighten the Locknuts yet.
Attach the Seat Frame (6) to the Front Leg (7)
in the same way.
3
Up
33
69
60
96
94
4
68
68
6
68
59
7
58
59
8
7
96
1
59
58
68
59
93