12. Apply grease to an M10 x 85mm Bolt (67) and to
two Arm Bushings (44).
Attach the Right Arm (9) to the Pivot Frame (5)
with the M10 x 85mm Bolt (67), two M10
Washers (57), the two Arm Bushings (44), and an
M10 Locknut (56). Do not overtighten the
Locknut; the Right Arm must pivot easily.
Attach the Left Arm (10) to the Pivot Frame (5)
in the same way.
Cable Assembly
13. See the CABLE DIAGRAM on page 25 and
identify the Arm Cable (54).
Apply grease to an M8 x 22mm Shoulder Bolt
(65).
Attach the Arm Cable (54) to the indicated Cable
Pivot (39) with the M8 x 22mm Shoulder Bolt (65)
and an M8 Locknut (58).
12
Grease
9
44
Grease
13
13
5
67
57
57
10
56
58
39
54
Grease
65